Oval Exhaust
Check out our lineup for variety of oval exhaust components and build kits. These parts are available in 3" through 5" equivalent, and come in a large variety of components. From mandrel bends and pie cuts, to mufflers, x pipes, and transitions, this oval exhaust catalog is sure to exceed all of your expectations.
This 3” oval tubing has a height of 2 1/8” X 3 ½” wide. Made from an American made .065 wall 304 stainless and formed in our facility, this makes a great option for those low clearance applications that require a larger tube size for performance reasons.
Our oval flanges are precision made from an American made 304 stainless steel. The 3" port ID is 2 1/8” X 3 1/2” wide.
Our oval flanges are precision made from an American made 304 stainless steel. The 3 1/2" port ID is 2 1/2” X 4” wide.
Our oval flanges are precision made from an American made 304 stainless steel. The 4" port ID is 2 5/8” X 4 5/8” wide.
Our oval flanges are precision made from an American made 304 stainless steel. The 4 1/2" port ID is 3” X 5 1/8” wide.
Our oval flanges are precision made from an American made 304 stainless steel. The 5" port ID is 3 3/8” X 5 7/8” wide.
This 3 1/2” oval tubing has a height of 2 1/2” X 4” wide. Made from an American made .065 wall 304 stainless and formed in our facility, this makes a great option for those low clearance applications that require a larger tube size for performance reasons.
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall x 3 1/2" wide
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall x 3 1/2" wide
This 4” oval tubing has a height of 2 5/8” X 4 5/8” wide. Made from an American made .065 wall 304 stainless and formed in our facility, this makes a great option for those low clearance applications that require a larger tube size for performance reasons.
Our oval to round transitions are made from an American made .065 304 stainless. The overall transition length is 8” with an end form height of 2 1/8” X 3 ½” wide.
Our oval exhaust twists are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval twists are ideal for under car exhaust systems with a low ground clearance, or going over an axle.
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall x 4" wide
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall x 4" wide
This 4 1/2” oval tubing has a height of 3” X 5 1/8” wide. Made from an American made .065 wall 304 stainless and formed in our facility, this makes a great option for those low clearance applications that require a larger tube size for performance reasons.
Our oval to round transitions are made from an American made .065 304 stainless. The overall transition length is 8” with an end form height of 2 1/2” X 4” wide.
Our oval exhaust twists are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval twists are ideal for under car exhaust systems with a low ground clearance, or going over an axle.
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall x 4 5/8" wide
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall x 4 5/8" wide
This 5” oval tubing has a height of 3 3/8” X 5 7/8” wide. Made from an American made .065 wall 304 stainless and formed in our facility, this makes a great option for those low clearance applications that require a larger tube size for performance reasons.
Our oval to round transitions are made from an American made .065 304 stainless. The overall transition length is 8” with an end form height of 2 5/8” X 4 5/8” wide.
Our oval exhaust twists are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval twists are ideal for under car exhaust systems with a low ground clearance, or going over an axle.
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall x 5 1/8" wide
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall x 5 1/8" wide
Our oval exhaust twists are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval twists are ideal for under car exhaust systems with a low ground clearance, or going over an axle.
Our oval to round transitions are made from an American made .065 304 stainless. The overall transition length is 8” with an end form height of 3” X 5 1/8” wide.
Our oval to round transitions are made from an American made .065 304 stainless. The overall transition length is 8” with an end form height of 3 3/8” X 5 7/8” wide.
Our oval exhaust twists are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval twists are ideal for under car exhaust systems with a low ground clearance, or going over an axle.
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall x 5 7/8" wide
The 45 degree kit contains 5 pie cut units, which can be welded to form a 45 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall x 5 7/8" wide
Our oval slip joints are made from an American made .065 304 stainless. The overall slip joint length is 8” with an end form height of 2 1/8” X 3 ½” wide.
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall x 3 1/2" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall x 3 1/2" wide
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
Our oval slip joints are made from an American made .065 304 stainless. The overall slip joint length is 8” with an end form height of 2 1/2” X 4” wide.
Our oval slip joints are made from an American made .065 304 stainless. The overall slip joint length is 8” with an end form height of 2 5/8” X 4 5/8” wide.
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall x 4" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall x 4" wide
Our oval slip joints are made from an American made .065 304 stainless. The overall slip joint length is 8” with an end form height of 3” X 5 1/8” wide.
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
Our oval slip joints are made from an American made .065 304 stainless. The overall slip joint length is 8” with an end form height of 3 3/8” X 5 7/8” wide.
Our oval bends are made out of true American made 304 Stainless Steel, with a .065" wall thickness. These oval bends are ideal for under car exhaust systems with a low ground clearance, or going through a frame.
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall x 4 5/8" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall x 4 5/8" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall x 5 1/8" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall x 5 1/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall by 3 1/2" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3" Oval pieces have a circumference equal to that of 3" round tubing, with approximate dimensions of: 2 1/8" tall by 3 1/2" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall x 5 7/8" wide
The 90 degree kit contains 10 pie cut units, which can be welded to form a 90 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall x 5 7/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall by 4" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Our American 3 1/2" Oval pieces have a circumference equal to that of 3 1/2" round tubing, with approximate dimensions of: 2 1/2" tall by 4" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall by 4 5/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4" Oval pieces have a circumference equal to that of 4" round tubing, with approximate dimensions of: 2 5/8" tall by 4 5/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall by 5 1/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Our American 4 1/2" Oval pieces have a circumference equal to that of 4 1/2" round tubing, with approximate dimensions of: 3" tall by 5 1/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall by 5 7/8" wide
The 180 degree kit contains 20 pie cut units, which can be welded to form a 180 degree bend.
Commonly referred to as "hard way" oval, our pie cut kit takes the difficulty out of fabricating custom oval exhaust on the vertical plane.
Our American 5" Oval pieces have a circumference equal to that of 5" round tubing, with approximate dimensions of: 3 3/8" tall by 5 7/8" wide
