Ford Header Flanges

Home > Header Components > Header Flanges > Mild Steel Header Flanges > Ford Header Flanges

Ford Header Flanges

Ford Header Flanges

Our American made Ford header flanges are precision CNC laser jet cut from 3/8” stainless steel or 1018 cold rolled steel.

Stainless Header Mfg., Inc. offers the finest in CNC laser cut header flanges. While most header flanges are made from 1/4" or 5/16" material, our are precision CNC laser cut header flanges are cut from from 3/8" material. We offer our flanges in 304 stainless steel or 1018 cold rolled steel. The heavier material we use to fabricate our flanges greatly reduce the warping problems seen in other lighter flanges. These header flanges are U.S. made. Make sure to ask about custom header flanges.

Check Out Our Full Line Of Complete
Ford Header Build Kits

Filters

Sort By:

Products per page

Apply Filters

Ford Triton V-10 Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for the Ford Triton V-10 engine used in the heavy-duty Ford trucks and vans from 1997-2010.
Port Size: 1.615"

$53.95

Ford 7.3L PowerStroke Mild Steel Header Flange

Precision laser cut from 3/8" thick 304 stainless, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for the Ford 7.3L PowerStroke found in the heavy duty trucks and vans from 1995-2003.
Port Size: 1.733"

$44.95

Small Block Ford-Windsor Mild Steel Header Flange for Brodix Track 1 Head

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for all small block Ford-Windsor engines with Brodix Track 1 Series 20 degree heads. Will fit 2" and 3" bolt spacing.
Port Size: 1.804"

$44.95

Ford 5.4L 32v Modular Motor Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for the 5.4L Cobra Jet Modular motor found in the high performance Mustang SVT Cobra R, Shelby GT 500, and Mustang GT, each in various years from 2000-2012.
Port Size: 1.868"

$44.95

Big Block Ford (429-460) Square Port Mild Steel Header Flange

Big Block Ford C460 Square Port Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for all big block Ford engines with 385-series heads from 1968-1997, with the exception of the Cobra Jet models.
Port Size: 2.341"

$44.95

Big Block Ford (429-460) Oval Port Mild Steel Header Flange

$44.95

Ford "Boss 9" Mild Steel Header Flange to fit Jon Kaase 429

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. and are machine surfaced. These header flanges are specifically made for the small block Ford Jon Kaase Racing Boss 9 heads.
Port Size: 2.147"

$44.95

Ford 362 Roush/Yates D3 Mild Steel Header Flange

$44.95

Small Block Ford- Windsor Stainless Header Flange for AFR 220cc Renegade Race Head Mild Steel

Small Block Ford- Windsor Header Flange for AFR 220cc Renegade Race Head Mild Steel

These precision laser cut 3/8" thick mild steel header flanges are manufactured in the U.S.A and are machine surfaced. These flanges fit the small block Ford 302-351W AFR 220cc Renegade Race Heads with 3" bolt spacing.

$44.95

Ford 4.6L Modular V-8 Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the Ford 4.6L Modular motor found on a variety of Ford trucks, vans, and Mustangs from 1991-2012.
Port Size: 1.936"

$44.95

Ford Boss 429 Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the Ford Boss 429 Mustang used in 1969 &1970.
Port Size: 2.221"

$44.95

Ford 2.3L I4 DOHC Mild Steel Header Flange

Precision laser cut from 3/8" thick 304 stainless, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the Ford 2.3L I-4 used from 1995-2006.
Port Size: 1.500", 1.750"

$44.95

Ford FE Low Rise Port 390, 406, 428 Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A and are machine surfaced. These header flanges are specifically made for the Ford FE 390, 406, 428 low rise port engines

$44.95

Ford FE 427 High Rise Mild Steel Header Flange

$44.95

Ford Small Block with Yates SVO Port Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A and are machine surfaced. These header flanges are specifically made for the small block Ford with Yates SVO heads. This flange has a rectangle port with 1.875" by 1.700" dimensions.

$44.95

SBF-W Mild Steel Header Flanges for Victor Senior Heads

These precision laser cut 3/8" thick mild steel header flanges are manufactured in the U.S.A. and are machine surfaced. These flanges have a rectangle port with 1.750" by 1.625" dimensions. They fit the small block Ford 302-351W Edelbrock Victor Heads with 2 1/2" bolt spacing.

$44.95

SBF 351C 4 Brrl. Large Port Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the small block Ford 351 Cleveland engines with the 4 Brrl. port.

$44.95

SBF- 351C 4 Brrl. 1 3/4" Port Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.a. and are machine surfaced. These header flanges are specifically made for the small block Ford 351 Cleveland engines with the 4 Brrl. port.

$44.95

Ford 312 Y Block Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the Ford 312 Y Block engines. This flange has a rectangle port with 1.415" by 1.200" dimensions.

$44.95

Ford 5.0L Coyote Mild Steel Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S.A. and are machine surfaced. These header flanges are specifically made for the Ford 5.0 Coyote engines.

$44.95

TFS R Twisted Wedge Mild Steel Header Flange

SBF Raised Port Header Flange

$44.95

Ford Focus 2.0 Zetec Mild Steel Header Flange

Ford 2.0 Zetec Header Flange

$44.95

Ford Small Block 260-351 Windsor 1 3/4" Port Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. These header flanges are specifically made for the Ford 260-351 Windsor engines. This flange has a rectangle port with 1.385" by 1.700" dimensions, with 2" bolt spacing, and is designed to be used with a 1 3/4" primary tube.

$44.95

Ford Small Block 260-351 Windsor 1 5/8" Port Header Flange

Precision laser cut from 3/8" thick mild steel, our header flanges are manufactured in the U.S. These header flanges are specifically made for the Ford 260-351 Windsor engines. This flange has a rectangle port with 1.260" by 1.575" dimensions, with 2" bolt spacing, and is designed to be used with a 1 5/8" primary tube.

$44.95

Ford Z304 Header Flange-Mild Steel

These precision laser cut 3/8" thick mild steel header flanges are manufactured in the U.S. and are machine surfaced. Sold separately. These flanges fit Ford Z304 and AFR head.

$44.95

SEARCH

SEARCH